Industrial Reverse Osmosis Plant

An Industrial Reverse Osmosis Plant is a big water cleaning machine that runs nonstop to give factories, towns or bottling halls an even stream of salt-free, germ-free water. Dirty feed water first meets a small pump that pushes it forward. A strong high-pressure pump forces the water through multiple cleaning steps - a bed of crushed gravel and sand catches mud and rust - a tank of charcoal pulls out chlorine plus bad smells - final spun fiber cartridges trap any leftover bits. After this rough cleaning, the water reaches rows of stainless steel tubes. Inside each tube sits a thin plastic sheet wound like a snail shell. Holes in the sheet are so small that salt, metals, germs and most color bodies stay on the dirty side - only clean water slips through. Up to ninety-nine per cent of dissolved junk stays behind and washes away as a small waste stream. A wall-mounted box holds a computer board but also small meters. The board watches water pressure, flow rate and salt level every second. If a number drifts, valves open or close, and pumps speed up or slow down, so the unit keeps running at the set point. Operators often add three extras. A small pump drips in a clear antiscalant liquid so that calcium as well as silica do not coat the membranes. A CIP skid stores tanks of soap and acid - hoses hook up for a timed wash without plant disassembly. A stainless UV lamp cabinet gives the final water one last burst of light so that no living cell reaches the product line. The whole set of pumps, filters, tubes and tanks bolts to one welded stainless frame - fork lift pockets or eye-hooks let crews move the skid and drop it in place with minimal pipe work. Find some of the best Industrial Reverse Osmosis Plants here at Aajjo.